How to Shoot Well in Low Light Conditions !!

Using Indoor Flash

There will be times when the light’s just not bright enough to get the shot you need. Using flash is the answer, but it can be a very harsh form of illumination and often results in bleached-out faces and red eyes. If you’re lucky enough to have a dedicated external flashgun for your camera then you can tame this wild and unforgiving light. If you have a separate flashgun or Speedlight, then bouncing your flash off the ceiling or a wall is a great way of softening the effect of a flash. It basically uses the ceiling as an enormous diffuser to spread the light around the room evenly. If your flash is the fixed type then you could try taping a piece of white paper in front of the flash tube to diffuse the effect.

Bouncing a flash off a white ceiling turns your light source into a lovely, soft and even illumination. This can produce superb shots that don’t even look as if they ‘ve been taken with a flash.


Find a Window

The winter light may be weak but the watery light of a low sun through a window can make the perfect setting for a really great portrait. If you use a reflector or a large sheet to reflect back some of that light you can produce a truly evocative portrait. Use a tripod and a remote release and then talk to your subject without looking through the camera. Set the person at ease and watch the effect of the light as you move the reflector around. Some of the best portraits are shot using this simple Rembrandt lighting technique.

Use a Tripod

Slow shutter speeds are great for really impressive indoor shots but the slower the shutter speed, the greater the risk of camera shake. If you’re shooting without the benefit of flash then you really should use a tripod for those low-light shots. Make sure the tripod is a sturdy model and use a remote release if you have one. Some DSLR cameras enable you to lock the mirror up for these types of shots in order to cut down on vibrations.

Keep Noise Down

One way you can capture lifelike pictures in low light is to boost your camera’s ISO setting. Great idea. So why not keep it racked up all the time? Well, turning up the ISO is like winding up the volume on a stereo during a quiet passage of music. You can hear things better but you also get a load of hiss and other noise. A similar thing happens when you amplify the signal from a camera’s CCD. A lot of visual noise can spoil the shot with unattractive artefacts.

Most DSLRs perform at sensitivities up to ISO 400. By the time you get to ISO 800 the noise is starting to show. If you need a higher shutter speed by all means boost the ISO, but don’t overdo it! If you find yourself dialling in too much ISO, switch to a different low-light photo technique.

Shoot a Candlelit Portrait

A shot illuminated by a candle makes for a very romantic image and is well worth trying. Don’t adjust the white balance, as you probably want a fairly orangey glow in this sort of shot. Use a tripod and an ISO of around 400. Ask your subject to be as still as possible to avoid any blur as your shutter speed is likely to be well below 1/30th second. Underexposing works better too, otherwise the candle flame may be overexposed. Shoot using Aperture Priority (Av) mode and choose your widest aperture (this will be the smallest f-number your lens goes down to, f/3.5 for example). Holding your exposure compensation button, which will be a square divided with + and - icons, twist your camera’s dial until it reads -1.0. This is equal to minus 1-stop of compensation, which should avoid any overexposure of the candle flame.

Blend Light

A good way to soften the effect of the flash indoors is to set your camera to Shutter Priority (Tv) and turn the shutter speed down to around 1/30 sec. The flash will still illuminate anything in the foreground, but the slower shutter speed will capture some of the ambient light in the room to soften the effect of the flash tube. This is the way pros shoot and gives satisfying results you can be proud of.
The same effect works even with separate flashguns and bouncing techniques.

Watch the WB

Digital camera CCDs record light differently to our eyes. To your camera, white light can either be warm (red) or cool (blue). Using a camera’s White Balance function you can ensure a good colour balance. The settings can range from tungsten (warm), which is used for normal household bulbs, to flash (cool), which should only be used in a studio. The most useful setting for low-light indoor shots without a flash is tungsten. A custom white balance setting gives the best results, but remember to recalibrate your custom setting each time you change light or location.

Shoot Three Shots
The action of pressing the shutter on your camera can introduce camera shake and therefore result in a blurred photo. Switch your camera to Burst or Continuous mode and keep your finger on the shutter for three shots. You’ll find the shooting mode either in your camera’s menu or as a separate button on the body. The first and last shots may be blurred as you put your finger on the shutter and take it off again, but the one in the middle will often be perfectly sharp. That’s how the pros do it!

How to Shoot A Great Indoor Photo !!

A setting that has always worked for me to achieve great indoor photography. This came after so many photographs taken indoor. These settings allow you to see people or subjects in the foreground and still see the warmth of the room or any features or lights in the background.

Settings for Indoor Photography

Put your camera onto M for manual (this is the setting on Nikon’s, not sure about other models). Set your aperture to as big as it will go eg. F3.5 or F1.8 (depending on the lense). Set your shutter speed to around 1/60. It is hard to shoot handheld with anything below 1/60. As a rule of thumb you should never shoot lower than your focal distance while handheld. Eg on a 50mm lense you should never shoot lower than 1/50 sec.
You will then need to use you external flash, if you can bounce your flash do this, if you have a catch light reflector built into your flash even better.

Take a few shots and see what they look like. If they are not bright enough try bumping up your ISO to 200 then 400 and so on until you achieve an acceptable result.

This style of photography will have great lighting on people in the foreground and still have the impact of the room lighting and features in the shot. Just a plain old photo with the flash will normally burn out people in the foreground and black out the background. Give it a go!